How to resolve AdBlock issue?
Oscilloscope News |
10 September 2019 - Keysight Technologies announced the first single box multi-channel solution for wideband mmWave measurements. Available for Keysight UXR-Series of oscilloscopes the solution enables fast, affordable, coherent analysis for wideband measurements up to 110 GHz; accelerating development of next generation mmWave communications, satellite communications and radar applications.
30 August 2019 - Hantek launched the DPO6000 series 4 channel digital phosphor oscilloscope. DPO6000 series has 6 functions: 4 channel oscilloscope, 16 channel logic analyzer, 2 channel waveform generator, digital voltmeter, serial protocol analyzer and FFT spectral analysis. It offers a bandwidth of up to 200MHz, a memory depth of 64 Mpts and supports segmented storage (up to 80,000).
28 August 2019 - Pico Technology has added DALI decoding and analysis with the latest version of PicoScope 6 software. DALI (Digital Addressable Lighting Interface) provides two-way communications between lighting fixtures (“luminaires”), ballasts and controllers. A DALI controller can talk to individual LED drivers and ballasts, and those devices can in turn talk back to the controller to report light failures, energy consumption, ambient light conditions and so on.
26 August 2019 - Teledyne LeCroy launched a new dedicated Automotive Ethernet Debug Toolkit, and an Automotive Ethernet Breakout Test Fixture which cover all aspects of physical layer Automotive Ethernet testing with compliance testing for 100Base-T1 and 1000Base-T1.
21 August 2019 - Pico Technology introduced the PicoScope 9404-16 SXRTO, a 16 GHz sampler-extended real-time oscilloscope. The new model joins the 5 GHz 9404-05 model launched earlier this year. Ideally suited to repetitive or clock-derived signals, both models feature four high-resolution 12-bit channels, each supported by real-time sampling to 500 MS/s per channel and up to 5 TS/s (0.2 ps) equivalent-time sampling.
09 August 2019 - RIGOL Technologies announces an expansion to its UltraVision II oscilloscope portfolio with the introduction of the New MSO8000 Series Digital Oscilloscope. Delivering Bandwidth up to 2 GHz Bandwidth and a new Jitter and Real-Time Eye Analysis package the MSO8000 Series extends RIGOL's value proposition into serial data analysis and signal integrity applications.
26 July 2019 -- Tektronix released two new software packages that greatly simplify Automotive Ethernet testing, debug and Protocol Decode for use with its 5 and 6 Series mixed signal oscilloscopes (MSO). Using the new Signal Separation software, automotive engineers can now perform Automotive Ethernet testing without disrupting the ECU system or cutting the Ethernet cable to install a directional coupler, while the PAM3 analysis package provides in-depth insight into signal characteristics at the system level.
04 July 2019 - The increasing use of ECUs in vehicles, and advanced signal processing, is driving the need for high performance automotive networks. 100BASE-T1 / BroadR-Reach has emerged as the physical layer standard for automotive applications. It uses PAM3 signalling on a differential twisted pair to give good performance and noise immunity for a reasonable cost.
03 July 2019 – Teledyne LeCroy announced the latest offering in its Teledyne Test Tools (T3)-branded portfolio of test equipment with the launch of a series of Rogowski Coil Current Probes, which are electrical devices used for measuring alternating current or high-speed current pulses.
02 July 2019 - Tektronix expands its scalable DPO70000SX Series Performance Oscilloscope to include new 13 GHz and 16 GHz models. The new offerings allow engineers to take advantage of the high sample rate and low noise floor of Tektronix’ highest performance family of oscilloscopes at lower bandwidth levels and more affordable price points.
Related Articles:
- You are here:
-
Home
- News